A method is described to form a MOSFET with a fully silicided gate electrode and fully silicided, raised S/D elements that are nearly coplanar to allow a wider process margin when forming contacts to silicided regions. An insulator block layer is formed over STI regions and a conformal silicidation stop layer such as Ti/TiN is disposed on the insulator block layer and active region. A polysilicon layer is deposited on the silicidation stop layer and is planarized by a CMP process to form raised S/D elements. An oxide hardmask on the gate electrode is removed to produce a slight recess between the spacers. A silicidation process yields a gate electrode and raised S/D elements comprised of NiSi. Optionally, a recess is formed in the substrate between an insulator block mask and spacer and a Schottky barrier is used instead of a silicidation stop layer to form a Schottky Barrier MOSFET.

This invention describes a method of stacking, bonding, and electrically interconnecting a plurality of thin integrated circuit wafers to form an interconnected stack of integrated circuit layers. The first integrated circuit layer is formed by conventional processing on a silicon wafer to the stage where bond pads are patterned on a wiring layer interconnecting the subjacent semiconductive devices. The remaining integrated circuit layers are formed by first processing a standard wafer to form integrated circuit devices and wiring levels up to but not including bond pads. Each of these wafers is mounted onto a handler wafer by its upper face with a sacrificial bonding agent. The wafer is thinned, permanently fastened to the top surface of the first base wafer by a non-conductive adhesive applied to the thinned under face, and dismounted from the handler. Vertical openings are etched through the thinned layer to the bond pads on the subjacent wafer. Robust conductive pass-through plugs with integrated upper bond pads are formed in the openings. Additional thinned integrated circuit layers may be prepared, thinned, cemented onto the stack. Wiring interconnections can be made between any two or more layers. The process is unique in that it can be used to further stack and interconnect any number of thinned wafer layers to form a three dimensional integrated circuits, including MEMS devices. This approach provides a low temperature wafer bonding method using an adhesive which results in process simplicity and cost effectiveness by eliminating an additional masking and patterning process for under bump metal thereby enabling standard wafers to be integrated into a 3D stack with existing wire bonded wafers.